Denn's personal web page :: DIY Electronic Projects :: SLO-Recto-Twin
How to cook the SLO-Recto-Twin at home :)
Here is the circuit diagram.
Now it's a temporary version, built on components of the old tube TV-set :)
tubes: 6N2P-EV (russian analog of 12AX7)
capacitors: K73-15A (film, used)
cathode capacitors: HITANO, 1 uF x 50 V, non-polar
resistors: MLT-0,5W & MLT-2W
anode voltage: DC 320 V, not stabilized
heating voltage: DC 6.0 V, stabilized (simple stabilizer)
There's no adjustments and special screenings was used.
Common view
Tubes
Tone-control
Power supply
Sound examples:
Clean, break-up (split neck PU)
Strat-like sound :) (split neck PU)
Chords (neck PU)
a bit of Crunch (split neck & split bridge PU's in parallel)
Crunch (bridge PU)
Rythm passages (bridge PU)
Power Chords (bridge PU)
Tapping on a bass strings; Intervals (bridge PU)
Sustain, Voicing (neck PU)
A lot of the Gain! (bridge PU)
Electric guitar Ibanez RG3120TW, neck pickup - DiMarzio PAF Pro, bridge pickup - DiMarzio ToneZone.
Recorded through speaker simulator into "line-in" directly. No any sound processing applied (except normalization and MP3-encoding).
|